Pool & Spa Valve 1 1/ 2" - 2 Way and 3 Way Connections 2" -2 Way And 3 WAY Connections Design Specifications Thermoplastic Pool & Spa Valves are manufactured for either two way or three way flow direction. Body is one piece. The stem and sealing unit is of the rotary type. The self locking handle makes it easier to use and adjust and the lock ring closure allows quick and easy maintenance without special tools. * Body PVC, ASTM D-1784 ( white) * Rotor Gate, Seal Retaining Plate, Rotor Shaft PPG, Polypropylene Glass reinforced * Rotor Seal, Rotor O-Ring, Lid O-Ring EPDM, Ethylene Propylene Diene Monomer * Handle ABS End connectors shall conform to the following standards: * Socket ASTM - D2467 ( PVC, SCH-80) * Threaded ASTM - D2464 ( PVC, SCH-80) * Indenpendent Testing Results 2" - 3 Way Valve 10, 000 Cycles under 70 psi water pressure at ambient temperature. Leak Testing: tests were performed after each 5000 cycles at 70 & 100 psi working pressure at ambient temperature. No Leakage Occurred! Valve was not lubricated during the 10, 000 cycles. Valve body was tested at 225 psig water pressure for 15 minutes. Results - No leakage, no structural damage .
TAGS
VALVE GEARBOX , VALVE GEAR STORE , VALVE GEAR CAR , CONTROL VALVE POSITIONER , CONTROL VALVE EXCAVATOR , VALVE LIFTER , VALVE INDEX , VALVE SPECTRA , VALVE STOCK , VALVE JAKARTA , VALVE BEKASI , VALVE JAKARTA , VALVE BANDUNG , VALVE BALI , VALVE MAKASSAR , VALVE INDONESIA , CONTROL VALVE MURAH, CONTROL VALVE STOCK
